HTS CODE | Harmonized Tariff Schedule



216.16.230.210 find tab handle on date 2018-01-13


Search Result:

Search Results : 75
3923.21.0085
Polyethylene retail carrier bags (PRCBs) with handles (including drawstrings), with no length or width shorter than 6 inches (152.4 mm) or longer than 40 inches (1,016 mm)
3926.30.1000
Handles and knobs
3926.90.2500
Handles and knobs, not elsewhere specified or included, of plastics
3926.90.8700
Flexible plastic document binders with tabs, rolled or flat
4011.80
Of a kind used on construction, mining or industrial handling vehicles and machines:
4016.99.1000
Handles and knobs
4202.21
With outer surface of leather or of composition leather:
4404
Hoopwood; split poles; piles, pickets and stakes of wood, pointed but not sawn lengthwise; wooden sticks, roughly trimmed but not turned, bent or otherwise worked, suitable for the manufacture of walking-sticks, umbrellas, tool handles or the like; chipwood and the like:
4417.00
Tools, tool bodies, tool handles, broom or brush bodies and handles, of wood; boot or shoe lasts and trees, of wood:
4417.00.2000
Broom and mop handles, 1.9 cm or more in diameter and 97 cm or more in length
4417.00.4000
Paint brush and paint roller handles
4417.00.8010
Tool handles
6603.90.4100
Umbrella handles, knobs, tips and caps
7114.11.1000
Knives with silver handles
7114.11.2000
Forks with silver handles
7114.11.3000
With sterling silver handles
7326.90.8676
Metal handles for brooms, mops, paint applicators and similar products
8204
Hand-operated spanners and wrenches (including torque meter wrenches but not including tap wrenches); socket wrenches, with or without handles, drives or extensions; base metal parts thereof:
8204.20.0000
Socket wrenches, with or without handles, drives and extensions, and parts thereof
8205.51.1500
Carving and butcher steels, with or without handles
8211.91.1000
Knives with silver-plated handles
8211.91.2000
Valued under 25¢ each, not over 25.9 cm in overall length
8211.91.50
Knives with rubber or plastic handles
8211.92.2000
Kitchen and butcher knives
8211.92.6000
Hunting knives with wood handles
8211.93.0031
Folding two-handled multi-use tools in which one or more tools are housed in each handle and one or more of the tools is a folding knife blade
8211.95
Handles of base metal:
8214.90.3000
Cleavers with their handles
8215.99.0100
Valued under 25¢ each, not over 25.9 cm in overall length
8215.99.2000
With rubber or plastic handles
8215.99.2200
Without their handles
8215.99.2400
Table forks (including table serving forks) and barbecue forks with wooden handles
8215.99.3000
Spoons valued under 25¢ each
8215.99.40
With base metal (except stainless steel) or nonmetal handles
8418.10.0045
Having an external depth (excluding door handles) not exceeding 73 centimeters
8418.99.4000
Door assemblies incorporating more than one of the following: inner panel; outer panel; insulation; hinges; handles
8427
Fork-lift trucks; other works trucks fitted with lifting or handling equipment:
8428
Other lifting, handling, loading or unloading machinery (for example, elevators, escalators, conveyors, teleferics):
8428.90.0210
Woodland log handling equipment (other than skidders)
8431.39.0070
Of the woodland log handling equipment of statistical reporting number 8428.90.0210
8472.90.9060
Other currency and coin handling machines
8486.40.0030
For lifting, handling, loading or unloading of boules, wafers, semiconductor devices, electronic integrated circuits and flat panel displays
8504.21.00
Having a power handling capacity not exceeding 650 kVA
8504.21.0020
Having a power handling capacity not exceeding 50 kVA
8504.21.0040
Having a power handling capacity exceeding 50 kVA but not exceeding 100 kVA
8504.21.0060
Having a power handling capacity exceeding 100 kVA but not exceeding 500 kVA
8504.21.0080
Having a power handling capacity exceeding 500 kVA but not exceeding 650 kVA
8504.22.00
Having a power handling capacity exceeding 650 kVA but not exceeding 10,000 kVA
8504.22.0040
Having a power handling capacity exceeding 650 kVA but not exceeding 2,500 kVA
8504.22.0080
Having a power handling capacity exceeding 2,500 kVA but not exceeding 10,000 kVA
8504.23.00
Having a power handling capacity exceeding 10,000 kVA
8504.23.0041
Having a power handling capacity exceeding 10,000 kVA but not exceeding 59,999 kVA
8504.23.0045
Having a power handling capacity exceeding 59,999 kVA but not exceeding 100,000 kVA
8504.23.0080
Having a power handling capacity exceeding 100,000 kVA
8504.31
Having a power handling capacity not exceeding 1 kVA:
8504.31.40
Having a power handling capacity less than 1 kVA
8504.31.4035
Having a power handling capacity less than 40 VA
8504.31.4065
Having a power handling capacity 40 VA or greater
8504.31.6000
Having a power handling capacity of 1 kVA
8504.32.0000
Having a power handling capacity exceeding 1 kVA but not exceeding 16 kVA
8504.33.00
Having a power handling capacity exceeding 16 kVA but not exceeding 500 kVA
8504.33.0020
Having a power handling capacity exceeding 16 kVA but not exceeding 50 kVA
8504.33.0040
Having a power handling capacity exceeding 50 kVA but not exceeding 500 kVA
8504.34.0000
Having a power handling capacity exceeding 500 kVA
8532.10.0000
Fixed capacitors designed for use in 50/60 Hz circuits and having a reactive power handling capacity of not less than 0.5 kvar (power capacitors)
8533.21.00
For a power handling capacity not exceeding 20 W
8533.31.0000
For a power handling capacity not exceeding 20 W
8709
Works trucks, self-propelled, not fitted with lifting or handling equipment, of the type used in factories, warehouses, dock areas or airports for short distance transport of goods; tractors of the type used on railway station platforms; parts of the foregoing vehicles:
9031.80.4000
Electron beam microscopes fitted with equipment specifically designed for the handling and transport of semiconductor wafers or reticles
9603.10
Brooms and brushes, consisting of twigs or other vegetable materials bound together, with or without handles:
9817.00.80
Articles of copper
9903.08.07
Handbags, whether or not with shoulder strap, including those without handle, with outer surface of sheeting of plastic (provided for in subheading 4202.22.15)
9903.41.15
Automatic data processing machines, of the type of which the constituent units are integrated in the same housing, whether finished or unfinished, which incorporate a microprocessor-based calculating mechanism, are capable of handling data words of at least 16-bits off the microprocessor, and are designed for use with a non-cathode-ray tube (non-CRT) display unit, whether or not capable of use without an external power source (provided for in subheading 8471.30 or 8471.41)
9903.41.20
Having a microprocessor-based calculating mechanism capable of directly handling memory of over 8 megabits (provided for in subheading 8471.49.10 or 8471.50)
9903.41.25
Having a microprocessor-based calculating mechanism capable of directly handling memory of not over 8 megabits (provided for in subheading 8471.49.10 or 8471.50)